CABLE LAYING MACHINE
DESCRIPION
Cable laying machine also called mini clamper which is used in marine pipe laying project to deliver cable or tube from vessel ship to seabed .Same as clamper, cable laying machine can deliver cable with constant stress automatically.
STRUCTURE
Cable laying machine is made up by 7 parts: Top driving device, bottom driving device, bottom tank, upright, beam, hydraulic control system and electric control system.
TECHNICAL PARAMATER
| TYPE | Working stress (KN) | Diameter range (mm) | Working speed (m/min) | Working pressure (Mpa) | Power (kW) |
|---|---|---|---|---|---|
| 2T | 20 | 60~220 | 0~8 | 4 | |
| 5T | 50 | 60~220 | 0~10 | 8 | |
| 10T | 100 | 60~300 | 0~10 | 16 | 22 |
| 15T | 150 | 60~300 | 0~10 | 16 | 37 |
| 25T | 250 | 60~300 | 0~10 | 60 |
CONTROL SYSTEM
Electric cabinet and hydraulic system are all installed onto the machine. Tension and stress are all displayed through pressure gage that measured by sensor. Hydraulic system has unloading gear to make sure the system keeps unloading during long time cable laying with constant stress.
As a result, all the system can save power. We also design a sensor on transmission shaft to display the length already pushed/pulled of the cable